Roder HTS Structures

Sports Structures

Select Structure Style Below

MUTLI-SPORTS STRUCTURES from RÖDER HTS HÖCKER  encompass a range of temporary and permanent modular building solutions designed for a variety of sporting applications enabling field and court sports activities to continue throughout the year whatever the season.

Structures are available in unlimited lengths in standard span widths of: 10m, 15m, 18m, 20m, 25m, 30m 37m and 40m – for ease of navigation, these standard structure sizes are categorised into small, medium and large Multi-Sports Structures.  In addition to our standard range of sizes, our pre-engineered multi-sports buildings can be manufactured to accommodate customers’ exact site-specific requirements. For example site specific wind and snow loads to comply with local planning control requirements or special widths and lengths, together with variable eave and ridge heights to fulfil most covered space sporting requirements.  

Multi-Sports Structures are supplied with two different options for the roof covering; customers can choose between the standard tensioned fabric single layer roof system and the THERMO inflatable energy efficient roof system.  Both roof systems are manufactured from a robust and highly durable, industrial grade PVC material which allows natural light to transmit through the translucent architectural roof membrane therefore keeping ongoing lighting costs to a minimum as daytime lighting costs are minimized.

All Multi-Sports Structures are available with a comprehensive range of non-insulated and fully insulated wall cladding options as well as accessory items including pedestrian and vehicle access doors, internal dividing screens, lighting systems which can be configured to ensure optimum play in combination with the available natural light, heating, ventilation and air conditioning (HV/AC).

When compared with traditional building methods, RÖDER HTS HÖCKER modular Multi-Sports Structures offer numerous advantages that should not be overlooked. These include significant costs savings with guaranteed fixed overall project costs, short production and rapid installation times. In addition, unlike conventional buildings, our structures are fully demountable and can therefore be resold, reconfigured, extended or relocated and re-used in a multitude of different applications at a later date.

With extensive life spans of 20 years and more, a Multi-Sports Structure provides a long-term yet sound investment. Save time and minimise expenditure with an innovative pre-engineered multi-sports structure system from RÖDER HTS HÖCKER.

Take the next step and contact us with your requirements today.

Images on website and gallery are the property of © Röder HTS Höcker GmbH - All rights reserved

Key Information For This Product Range:
Available widths: 25.00m, 30.00m, 37.00m, 40.00m
Eave height: 3.00m, 4.00m
Bay distance: 5.00m
Structure length: Unlimited
Snow loading Available on request
Roof type: Single layer or Thermo inflatable PVC
Walling option: PVC, Glass, Corrugated steel, Insulated panels
Please Select Your Preferred Size Below To View Full Technical Product Details

  • Wooden sub-frame with timber boards

    • Square timber joists form the base layer and are laid across the span of the structure.
    • Once laid, pressure treated / impregnated chamfered boards (2.95m or 4.95m x 50cm dependent on bay distance) are then laid on to the timber base.
    • The boards are locked into place by wooden battens that are fitted to the underside of the boards.
    • A special aluminium extrusion is then fitted, every 3m - 5m, along the length of the structure securing the flooring in each bay.
    • Once the flooring system is laid the structure can be erected.
    • With this type of floor, the structure is independent of the floor. However, if needed - party tents only - base-plates can be supplied and fitted to the special aluminium extrusion enabling the structure to be constructed above the floor.
    Enquire Enquire About this Structure

  • Ring-beam cassette flooring system


    view slideshow
    • The system consists alloy ground floor extrusions and interlocking cassette boards.
    • There are two sizes of cassette board. For party tents (3.00m bay distance), the boards are sized at 1.00m x 2.85m and for all big tent structures (5.00m bay distance); the boards are sized at 1.00m x 2.35m.
    • When laid, the boards are positioned on the sub-floor extrusion, which runs across the span of the structure.

     

    The sub-floor extrusion is hollow in design. This special feature is designed for two reasons. First, when used on party tent structures, 3.00m – 10.00m in span, special weights can be easily positioned within the extrusion and covered with a filler panel. Therefore, when the weights are used there is no need for earth anchors because the structure is weighted against uplift within the static calculation value specified for the party tent range. Therefore all party tent structures can be erected on any surface without the need for additional site preparation, for example drilling or using external weights in times when the ground surface cannot be damaged. Alternatively, when internal weights are not being used, standard earth anchor stakes can be used for erection on grass or hardcore etc.

    Secondly, when weights are not being used or the structure is greater than 10.00m in span the extrusion is designed to carry cabling or services through the structure (internal dimension 150mm x 80mm).

    Board technical specifications:

    Board size (party tent structures): 1.00m x 2.85m

    Board size (big tent structures): 1.00m x 2.35m

    Board thickness: 21mm

    Weight per panel (party tent): 39kg

    Weight per panel (big tent): 33kg

    Point loading (kgm2): 350kgm2

    Standard wood type / finish: 3-ply cross-glued with smooth wood finish or non-slip surface to top with smooth underside. Exposed sides are coated and sealed to reduce water impregnation alternatively (at extra cost); the board ends can be fitted with special alloy protection guards.

     

    Enquire Enquire About this Structure

  • Georgian or Clear PVC window walls

  • Integrated cassette ABS / hard walling system.

  • Integrated cassette ISO / hard walling system.

  • Internal & external access ramps


    view slideshow
    • Supplied for personnel, pedestrian and goods access. 
    • Non-slip finish in accordance to health and safety requirements.
    • Ramp and step units are available in various widths and lengths.
    • Can be fitted with hand rails.
    Enquire Enquire About this Structure

  • Overhead door canopies


    view slideshow
    • Used in combination with personnel and roller shutter door units. 
    • Provides shelter for personnel when loading or unloading vehicles. 
    • Can be attached to any area of the structure. 
    • Can be fitted with gutter system.
    Enquire Enquire About this Structure

  • Portal beams instead of cross wires

  • Premium double door units

  • Single door units

  • Transportation storage rack systems