Roder HTS Structures

HOECKER P-SERIES Structures

Select Structure Style Below

A HOECKER P-SERIES marquee structure is much more than a roof over your head. It’s an investment that begins to yield a profit within a very short space of time. The limitless size and style configurations that are possible with a HOECKER P-SERIES clear span marquee structure system make it not only a logical and economical solution, but also an extremely practical one.

The HOECKER P-SERIES clear-span marquee system covers a wide range of modern marquee designs, developed specially with professional marquee rental companies and high quality end-user applications in mind. Their robustness, durability and stability, allied with fast assembly and dismantling times, have established the range's enviable reputation among our customers for many years.

HOECKER P-SERIES marquee structures are available in clear-span widths of 3.00m, 4.00m, 6.00m, 8.00m, 9.00m, 10.00m and 12.00m. Our original manufactured HOECKER Structures marquees and pavilions are modular by design and are based on a bay distance of 3.00m with a standard eave height of 2.40m. The basic starter unit is 6.00m long which can be infinitely extended with additional 3.00m extension bays.

Standard HOECKER P-SERIES marquees are available in a number of designs including the traditional "A" frame design, "CURVED" roof, hexagonal and octagonal designs. The range can be enhanced further by adding complete or half hexagonal or octagonal extensions to standard structures or integrating high-peak roof conversions between normal bays thus dramatically enhancing the marquee's visual appearance.

In addition you can integrate one or more of the many HOECKER P-SERIES Structures marquee accessories specifically designed for this range of marquee system. Accessories include steel sub-frame or integrated weighted cassette flooring systems, solid ABS or glass walling systems, single or double door units, linings, lighting and more.

Take the next step and contact us with your requirements today.

Images on website and gallery are the property of © Röder HTS Höcker GmbH - All rights reserved

Key Information For This Product Range:
Available widths: 3.00m, 4.00m, 5.00m, 6.00m, 8.00m, 9.00m, 10.00m, 12.00m 
Eave height: 2.40m
Bay distance: 3.00m
Structure length: Unlimited
Roof design: Standard "A" Frame
Please Select Your Preferred Size Below To View Full Technical Product Details
Key Information For This Product Range:
Available widths: 3.00m, 4.00m, 5.00m, 6.00m, 8.00m, 9.00m, 10.00m 
Eave height: 2.40m
Bay distance: 3.00m
Structure length: Unlimited
Roof design: Curved Roof
Please Select Your Preferred Size Below To View Full Technical Product Details

  • Wooden sub-frame with timber boards

    • Square timber joists form the base layer and are laid across the span of the structure.
    • Once laid, pressure treated / impregnated chamfered boards (2.95m or 4.95m x 50cm dependent on bay distance) are then laid on to the timber base.
    • The boards are locked into place by wooden battens that are fitted to the underside of the boards.
    • A special aluminium extrusion is then fitted, every 3m - 5m, along the length of the structure securing the flooring in each bay.
    • Once the flooring system is laid the structure can be erected.
    • With this type of floor, the structure is independent of the floor. However, if needed - party tents only - base-plates can be supplied and fitted to the special aluminium extrusion enabling the structure to be constructed above the floor.
    Enquire Enquire About this Structure

  • Galvanised steel sub-frame with timber boards

    • Highly effective in terms of initial cost and general usability.
    • This flooring creates a level and solid platform on which to base your event.
    • The system comprises of galvanised steel framework split into two layers, rectangular cross bearers and square joists.
    • Pressure treated / impregnated chamfered boards.
    • Boards are locked into place by wooden battens, which are fitted to the underside of the boards.
    • A special aluminium extrusion isfitted every 5m along the length of the structure securing the flooring in each 5m bay.

    N.B This flooring system is laid before the erection of the frame.

     

    Enquire Enquire About this Structure

  • Ring-beam cassette flooring system


    view slideshow
    • The system consists alloy ground floor extrusions and interlocking cassette boards.
    • There are two sizes of cassette board. For party tents (3.00m bay distance), the boards are sized at 1.00m x 2.85m and for all big tent structures (5.00m bay distance); the boards are sized at 1.00m x 2.35m.
    • When laid, the boards are positioned on the sub-floor extrusion, which runs across the span of the structure.

     

    The sub-floor extrusion is hollow in design. This special feature is designed for two reasons. First, when used on party tent structures, 3.00m – 10.00m in span, special weights can be easily positioned within the extrusion and covered with a filler panel. Therefore, when the weights are used there is no need for earth anchors because the structure is weighted against uplift within the static calculation value specified for the party tent range. Therefore all party tent structures can be erected on any surface without the need for additional site preparation, for example drilling or using external weights in times when the ground surface cannot be damaged. Alternatively, when internal weights are not being used, standard earth anchor stakes can be used for erection on grass or hardcore etc.

    Secondly, when weights are not being used or the structure is greater than 10.00m in span the extrusion is designed to carry cabling or services through the structure (internal dimension 150mm x 80mm).

    Board technical specifications:

    Board size (party tent structures): 1.00m x 2.85m

    Board size (big tent structures): 1.00m x 2.35m

    Board thickness: 21mm

    Weight per panel (party tent): 39kg

    Weight per panel (big tent): 33kg

    Point loading (kgm2): 350kgm2

    Standard wood type / finish: 3-ply cross-glued with smooth wood finish or non-slip surface to top with smooth underside. Exposed sides are coated and sealed to reduce water impregnation alternatively (at extra cost); the board ends can be fitted with special alloy protection guards.

     

    Enquire Enquire About this Structure

  • Georgian or Clear PVC window walls

  • Glass walling systems


    view slideshow
    • Can be fitted to any section of the structure (side or gable bay).
    • Manufactured in double glazed laminated safety glass.
    • Single or double door units integrated by eliminating glass panels.
    • Clear, frosted or tinted finish dependent on the application.
    • Frames manufactured in durable powder coated alloy or UPVC.
    Enquire Enquire About this Structure

  • Integrated cassette ABS / hard walling system.

  • Integrated cassette ISO / hard walling system.

  • Internal flat or pleated linings

  • Multi-sided end bays

  • Overhead door canopies


    view slideshow
    • Used in combination with personnel and roller shutter door units. 
    • Provides shelter for personnel when loading or unloading vehicles. 
    • Can be attached to any area of the structure. 
    • Can be fitted with gutter system.
    Enquire Enquire About this Structure

  • Portal beams instead of cross wires

  • Premium double door units

  • Single door units

  • Transportation storage rack systems